Skip to content

Celebrating 35 years: our Roster Management System is free for existing Chandler clients.Find out more.

Forklift Operator Labour Hire in Brisbane: Licences and Booking Checks.

A host guide to booking a forklift operator through labour hire in Brisbane. It covers the LF and LO licence classes, competency on your own truck and what to write into the booking.

Published
15 November 2026
Reading time
7 min
Topic
Employer Resources
Forklift operator carrying a pallet through a Brisbane warehouse aisle

Forklift operator labour hire in Brisbane puts a licensed person on your truck for a shift, a week or a busy season. If you only need the machine, an equipment hire company is the right supplier. What follows is about the person driving it.

The licence card is the first check, not the last. A Brisbane host still has to confirm the operator holds the right Queensland class, can handle your truck and attachments, and has been inducted to your floor. Written in that order, the booking is quick to put together and the first shift starts without surprises.

What forklift operator labour hire covers in Brisbane

Forklift operator labour hire is the supply of a licensed person to drive your forklift, under your direction, for an agreed period. The provider supplies the person and you direct the work on your site. Typical Brisbane bookings include covering a dock during leave, adding a shift for a stocktake or sale peak, loading containers for a project, or filling a gap while a permanent role is recruited. Queensland warehousing labour hire covers the wider set of warehouse roles around those bookings.

Be clear about what you are asking for, because "forklift hire" can mean three different things:

  • Machine only: an equipment hire company supplies the truck and you supply a licensed driver.
  • Operator only: a labour hire provider supplies the licensed person and you supply the truck.
  • Machine and operator together: some suppliers offer both, and then you write down who maintains the truck and who directs the driver.

Forklift hire in Brisbane can mean equipment hire alone, so use the word operator when you contact a supplier. Forklift driver hire in Brisbane means the same thing, and the forklift driver role guide describes the position in more detail.

Operator hire versus equipment hire

Operator hire adds checks on the person to the checks you already make on the truck. WorkSafe Queensland tells anyone hiring a forklift to check that the manufacturer's data plate is attached, and that each attachment has its own plate stating its limits of operation. When you hire an operator, you also check the licence, the training on your type of truck and the provider.

The provider check is a legal one. Under the Queensland labour hire licensing scheme, users of labour hire must only engage licensed providers, including interstate providers who supply workers in Queensland. A public register lets you search by business name, ABN, address, industry or location, and you can print a verification for your records.

That check applies to every labour hire booking, and the guide to labour hire in Brisbane covers it in detail.

LF and LO licences under Queensland rules

Queensland uses two high risk work licence classes for forklift work, and WorkSafe Queensland sets out the forklift licence classes on its licensing pages. Each covers a different kind of truck, so the class on the card matters as much as the expiry date.

  • LF, forklift truck: covers forklift trucks with forks or other arms that can be raised 900 mm or more above the ground. It does not include order-picking trucks, pedestrian-operated trucks or pallet trucks.
  • LO, order-picking forklift truck: needed where the operator's control is part of the load carriage and lifts with it. These are generally called stock pickers, and they include turret trucks in narrow-aisle warehouses.

If your floor runs both a counterbalance or reach truck and a stock picker, ask for both classes in writing. An LF holder cannot operate the stock picker, and WorkSafe Queensland lists LF and LO as two separate classes, so match the class to each truck.

Three habits keep the licence check honest:

  • Ask the provider to confirm in writing that the person holds the licence rather than being an authorised trainee, because WorkSafe Queensland allows trainees to operate a forklift.
  • Sight the licence yourself on the first day, match it to photo identification and record the date.
  • Keep a copy, since WorkSafe Queensland says businesses need copies of high risk work licences. The free forklift licence authorisation register records the licence check, equipment familiarisation and supervisor approval in one place.

Competency on your machine, not just the card

A licence class does not tell you whether the operator has driven your type of truck, your attachments or your racking. WorkSafe Queensland says a business should make sure its forklift operators are trained and qualified for the particular forklift and attachments they use, and that they follow the manufacturer's specifications. Attachments carry their own data plates stating limits of operation.

WorkSafe Queensland's training and supervision guidance says new workers must be trained so they are familiar with their tasks and place of work, with supervised hands-on training before they work without direct supervision. For a forklift operator that becomes a short sign-off on your own floor, covering:

  • The truck: type, controls and the rated capacity on the data plate.
  • Attachments: each one fitted, and which ones the operator may use.
  • Racking and aisles: the highest rack level, aisle widths, floor condition, ramps and dock edges.
  • Traffic rules: speed limits, pedestrian walkways, one-way routes and no-parking areas.
  • One real task: a supervised put-away to your highest level and a trailer load-out show more than a card does.

Name one supervisor who signs the operator off and records the date. For the long pre-start and red-flag list, use the full host checklist for forklift operators, which is not repeated here.

What to put in the booking before the operator arrives

A written booking stops the wrong person turning up. It gives the provider something to check against, and it gives your supervisor a record if a sign-off fails.

  • Licence class: LF, LO or both, with a requirement that the person is fully licensed and not a trainee.
  • Truck and attachments: the truck type, its rated capacity and every attachment the operator will use.
  • Task and height: put-away, picking, container unloading or truck loading, and the highest rack level.
  • Shift detail: start and finish times, breaks, address, gate or dock, and the PPE you require.
  • Induction and sign-off: a set time for the site induction and the supervised run before the operator works alone.
  • Supervisor: the name and number of the person who meets the operator and decides on sign-off.

Chandler Personnel provides labour hire and permanent recruitment to hosts across Queensland, and a booking written this way is ready to use when you request staff in Queensland. If the sign-off fails, the operator does not drive the truck. Tell the provider which check failed and ask for a replacement who meets the booking.

When a permanent forklift operator makes more sense

Labour hire suits cover, peaks and projects. When the same role stays open month after month on the same truck, each new face costs you an induction, a familiarisation run and a sign-off, and a permanent operator is the better fit. If you are hiring permanently, forklift jobs in Brisbane shows how candidates read the LF and LO tickets and the day-to-day work, which helps you write an advertisement that attracts the right licence class.

Common Questions About Forklift Operator Labour Hire

1. Do forklift operators need a licence in Queensland?

Yes. WorkSafe Queensland says a person should only operate a forklift if they hold a high risk work licence or are an authorised trainee. The class is LF for forklift trucks and LO for order-picking trucks. Pedestrian-operated forklifts fall outside the LF definition, but only trained operators should use them.

2. Is forklift hire the same as hiring a forklift driver?

No. Forklift hire usually means renting the machine from an equipment hire company, with no driver. Hiring a forklift driver through labour hire supplies a licensed person to operate your own truck. Say operator in your request and write down who owns the truck, who maintains it and who directs the work.

3. Can an LF licence holder drive an order-picking forklift?

No. WorkSafe Queensland states that the LF class does not include order-picking forklift trucks, and that an LO licence is needed to operate one. If your site runs both truck types, ask for both classes in the booking and sight each licence on the first day.

4. Who inducts an agency forklift operator on a Brisbane site?

The site induction is yours to arrange. WorkSafe Queensland says a business must give new workers training so they are familiar with their tasks and place of work, and it lists hazards, safe work procedures and emergency procedures as induction topics. Book induction and sign-off time into the first shift.

5. How should I brief a same-day forklift request?

Keep it short and written. State the licence class, the truck and attachments, the task, the address and start time, and the supervisor who meets the operator. Allow time for induction and a supervised run, then have the supervisor sign the operator off.

Check the Licence, Then the Machine

Booking a forklift operator in Brisbane comes down to two checks in order: the Queensland licence class on the card, then competency on your own truck, attachments and racking. Write both into the booking and give one supervisor the job of signing the operator off. Written into a request for staff, those two checks give the provider a clear job to fill and give you a clear start to the first shift.