Skip to content

Celebrating 35 years: our Roster Management System is free for existing Chandler clients.Find out more.

Construction Labour Hire in Brisbane: White Cards and Site Licences.

Construction labour hire in Brisbane starts with a white card, the right licence for each task and a licensed provider. Here are the checks a host should make before a labourer starts on site.

Published
15 November 2026
Reading time
7 min
Topic
Employer Resources
Two construction labourers beside a prepared concrete slab in Brisbane

Construction labour hire in Brisbane puts labourers and trades assistants on your site without adding them to your payroll, but the checks stay with you. Before the first shift, a host should be able to answer three questions. Does every worker hold a white card, does any task need a high risk work licence, and is the provider on the Queensland labour hire register?

This guide covers those checks for Brisbane builders, civil contractors and trades subcontractors. It skips the general hiring steps, which sit in our guide to recruiting for the construction industry, and sticks to the Queensland rules that decide whether a worker can start.

What construction labour hire covers on a Brisbane site

Labour hire means a provider supplies workers to do work for your business. On a building or civil site that usually means site labourers, trades assistants and general hands who carry materials, dig, clean up and support the trades. The title matters less than the tasks, because the tasks decide which cards and licences apply.

Chandler Personnel provides labour hire and permanent recruitment for Queensland hosts, and you can request staff in Queensland through its request form. For host checks that apply to every industry, our guide to labour hire in Brisbane is the better starting point.

The white card before the first shift

Under Queensland laws, anyone carrying out construction work must hold a general construction induction card. WorkSafe Queensland explains how cards are replaced on its general construction induction page. A labour hire worker follows the same rule as your own employees: no card, no construction work.

Cards are issued by registered training organisations approved by Workplace Health and Safety Queensland, once a worker completes the course. Ask each construction labourer in Brisbane to show the card at the gate before the shift. WorkSafe Queensland tells card holders to keep the training organisation's details and a copy of the card, because both are needed if a replacement is required. A copy in your site records saves a delay later.

A white card shows a worker has completed foundation training. It does not show they know your site. The course gives general knowledge of work health and safety laws, common site hazards and how to control risks, and your own induction covers the rest.

When a labourer job also needs a high risk work licence

A labourer booking can turn into a licensed job the moment someone is asked to run plant or handle loads. The licence follows the task, not the title on the booking. List the tasks in your request, and ask the provider to confirm who holds any licence those tasks need.

Two groups of classes are worth knowing by name. Forklift work has two classes: LF for forklift trucks and LO for order-picking forklift trucks, set out on the WorkSafe Queensland forklift page. Rigging has a ladder of licences, starting with dogging, then basic (RB), intermediate (RI) and advanced (RA) rigging. A basic rigging licence encompasses the requirements for a dogging licence, and intermediate rigging adds work such as tilt-slabs, demolition of structures or plant, and dual lifts.

WorkSafe Queensland's list of what licence you need also has separate categories for scaffolding, demolition work, cranes and hoists, and asbestos. If a task sounds like any of those, read the category before the worker starts. Do not assume an old ticket still fits the task in front of them.

Licensed provider checks on a multi-contractor site

Queensland's labour hire licensing scheme requires every provider operating in Queensland to hold a licence, including interstate providers who supply workers here. Users of labour hire must only engage licensed providers, and it is an offence to use an unlicensed one. Penalties can be substantial, and Labour Hire Licensing Queensland sets out what users must do in its guidance for users.

On a site with several contractors, the question gets wider. Labour Hire Licensing Queensland says that where a business engages an intermediary to engage a provider, both the business and the intermediary count as users of labour hire. So when a head contractor asks subcontractors to bring their own crews, it is worth confirming how each subcontractor sources its labourers.

The check itself is quick. The public register of licensed providers can be searched by business name, ABN, address, industry or location, and a verification can be printed. A provider that has only lodged an application does not qualify, because it must hold a current licence. Our guide to checking the Queensland labour hire register covers the steps in more detail.

Labour Hire Licensing Queensland also suggests that users keep a list of all workers on site and understand any subcontracting arrangements. On a busy site, a daily sign-in list that shows who supplied each worker makes both easy.

Site induction, supervision and who holds the duty

A site induction is specific to your site. It covers where the hazards are, how to raise a problem, who supervises, and what to do in an emergency. Run it before the worker starts and keep a record. Chandler also runs site inductions on behalf of clients.

WorkSafe Queensland says a business's primary duty of care under the Work Health and Safety Act 2011 includes giving workers the information, training, instruction or supervision needed for safety. Read its page on business and employer responsibilities, then put the split of responsibilities between you and the provider in writing in the booking terms. Treat the labour hire worker as part of your safety system from the first hour: same induction, same supervision, same daily talks as your own crew.

Two resources help here. A labour hire induction checklist keeps the first-day steps consistent, and the toolbox talk and job safety analysis pack supports the daily briefing for each task.

Casual crews versus permanent labourers

Casual site labourer hire suits work that comes in waves, such as a slab pour, a strip-out or a fit-out push. It also works well when you want to see how a labourer handles your site before you decide on a permanent hire. Permanent recruitment suits roles you fill every week of the year.

If the same casual labourer has been asked for week after week, that is a signal to talk about a permanent role. Chandler Recruitment handles permanent roles, and its trades and services recruitment page is the place to start.

Common Questions About Construction Labour Hire in Brisbane

1. Do labour hire labourers need a white card in Queensland?

Yes, if they carry out construction work. Under Queensland laws anyone carrying out construction work must hold a general construction induction card, and being supplied through a labour hire provider does not change that. Ask to see the card before the first shift.

2. Who pays for or arranges the white card?

The Queensland rule is about who holds the card, not who pays for it. Cards come from training organisations approved by Workplace Health and Safety Queensland. Settle cost and arrangements in the booking terms, and ask the provider to confirm the card is held before the shift.

3. What high risk work licences do construction labourers commonly need?

It depends on the task, not the title. Forklift work needs an LF or LO licence, and rigging tasks need a dogging or rigging class. WorkSafe Queensland's licence list also covers scaffolding, demolition, cranes and hoists, so check it against the tasks you plan to assign.

4. Is a trades assistant a labourer?

Titles vary between sites, so define the role by its tasks. A trades assistant usually works alongside one trade, and the booking should name that trade and the work involved. Card and licence requirements follow the tasks, whichever title you use.

5. How do I check the labour hire provider before a crew starts?

Search the public register by business name or ABN and print a verification of the licence. A pending application is not enough, because the provider must hold a current licence. Do this check before the first worker arrives, and file the printout with your site records.

No Card, No Start, No Exceptions

Construction labour hire in Brisbane runs smoothly when the checks happen before the shift, not during it. Sight the white card, confirm any licence the task needs, verify the provider on the register, then induct the worker into your site. When you need labourers or permanent hires for a Queensland site, the request form is the next step.